Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Glendale?
Metal roof installation in Glendale typically runs $18,000 to $42,000 for a standard single-family home, or roughly $9 to $18 per square foot installed. The low end covers a basic exposed-fastener steel panel roof on a simple ranch; the high end reflects standing-seam aluminum, complex slopes, and full tear-off of an old shingle layer. Most Glendale homeowners land closer to $24,000 to $32,000 once tear-off, underlayment, and city permits are factored in.
That’s a wide spread, and it’s honest. The final number depends on roof size, pitch, material, and how much of the existing roof has to come off first. What doesn’t change is our starting point: we inspect before we quote. We’ll tell you exactly what your roof needs, and what it doesn’t.
Key Takeaways
- Typical Glendale metal roof cost: $18,000 to $42,000, or $9 to $18 per square foot.
- Standing-seam aluminum runs higher than exposed-fastener steel; both outlast asphalt by decades.
- Tear-off, permits, and complex rooflines (common in Glendale’s older hillside homes) drive most of the cost swing.
- Inspection comes first. We don’t recommend a full metal roof unless the structure and condition actually call for it.
- Free estimates: call (877) 755-4274.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the money actually splits on a Glendale job. Ranges assume a 1,500 to 2,200 square foot single-family home.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Material (steel, aluminum) | $5.00 – $9.50 per sq ft | Standing-seam aluminum sits at the top; exposed-fastener steel at the bottom. |
| Tear-off of existing roof | $2,000 – $4,500 | One shingle layer. More layers or damaged decking cost more. |
| Underlayment & decking | $1,500 – $3,500 | High-temp underlayment and any soft-spot decking repairs. |
| Labor & installation | $4,500 – $9,000 | Steeper pitch and complex rooflines raise labor. |
| Flashing & trim | $800 – $2,000 | Ridge caps, valleys, vent boots, and edge metal. |
| Permits (city of Glendale) | $400 – $1,200 | Reroof permits are required; cost scales with project valuation. |
| Disposal & haul-off | $400 – $900 | Old shingles and metal offcuts. |
Standing-seam aluminum, favored on Glendale’s hillside homes because it handles the sun and doesn’t corrode, usually pushes the total toward $30,000 and up. Exposed-fastener steel panels bring it down. If you want the deeper material comparison, our guide on Metal Roof Installation in Glendale walks through profiles, finishes, and lifespan side by side.
What Affects Metal Roof Installation Pricing in Glendale
Glendale isn’t a single market. A 1920s bungalow near downtown and a steep lot up toward Chevy Chase Drive present completely different roofing jobs, and the price reflects that.
- Roof size and complexity. Square footage sets the base, but hips, valleys, dormers, and skylights add cutting, flashing, and labor. Every transition is a spot that has to be sealed right.
- Pitch. Glendale has plenty of steeper roofs on hillside lots. The steeper the walkable angle, the more time and safety gear installation takes.
- Material choice. Aluminum vs. steel, standing seam vs. exposed fastener, and paint or finish options all move the number. This is where being brand-agnostic helps. We work with GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so the recommendation is driven by your roof, not a single vendor.
- Sun and heat exposure. Glendale bakes in summer. That’s actually a point in metal’s favor, but it also means the underlayment has to be a high-temp product, which costs a little more upfront and lasts far longer.
- Age and condition of the deck. Older homes sometimes have plank decking or soft spots that need replacing before the new roof goes on. A proper inspection catches this before it becomes a surprise line item.
- Permits and timing. The city issues reroof permits, and scheduling during the dry season books up. Buying off-peak or bundling with a repair can shift the total.
How to Save on Metal Roof Installation
There’s no honest way to knock $10,000 off a real metal roof, but a few moves consistently keep the number down without cutting corners.
- Start with an inspection, not a quote. We offer roof inspection in Glendale as a standalone service, not just a sales funnel. Knowing the true condition of your roof and decking prevents paying for work you don’t need. Sometimes a repair buys years.
- Compare material against your actual need. If you love the look of standing seam but cost is tight, a quality exposed-fastener steel or a brand-matched repair may be the honest fit. We’ll give you the straight answer on repair versus replace.
- Do it during a repair assessment. If you already have roof repair in Glendale scheduled, we can evaluate whether a partial replacement or a full metal install makes more sense and avoid paying for overlapping work.
- Get clear numbers up front. We quote line by line, so you see what each item costs before you commit.
- Ask about timing. Scheduling during slower dry-season windows can occasionally lower labor pricing.
Free estimates are part of the deal. Call (877) 755-4274 and we’ll walk your roof and lay out the numbers before you spend a dollar.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost in Glendale?
Expect $18,000 to $42,000 for a typical single-family home, or $9 to $18 per square foot installed. Call (877) 755-4274 for an exact quote on your roof; estimates are free.
Is a metal roof cheaper than shingles in Glendale?
No. Metal costs roughly two to three times more upfront than architectural shingles on the same roof. But a metal roof can last decades longer and handle Glendale’s heat and sun without degrading. Our guide to roof replacement in Glendale compares the two over the long run.
How long does metal roof installation take?
Most Glendale homes take three to seven days once tear-off and decking are done. Complex rooflines, hillside access, or decking repairs can stretch the schedule. Call (877) 755-4274 to get a realistic timeline for your roof.
Does a metal roof add value to a Glendale home?
Usually yes. A metal roof is often rated to last many decades, and buyers in a hot-sun market like Glendale tend to value the energy performance and durability. Pair it with a clean inspection report from us and it’s an asset at resale.
Can you repair or replace just part of my roof?
Often, yes. If only a section is failing, a targeted repair can extend the life of the whole roof. That’s why we inspect first. Sometimes a $500 fix does the work of a replacement.
We’re a roofing-only company. Every job runs through the same three-service path: inspection first, repair when warranted, and replacement only when the roof truly needs it. We install and repair with materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we match the right one to your roof, not the other way around. If you’re weighing metal, compare metal roof installation in Glendale against your current roof before deciding. Returning to our home page shows the full service lineup.
Have a question about whether metal makes sense for your roof? Call (877) 755-4274 for a free, no-pressure estimate and a straight answer on what your roof needs. We work across Glendale and the surrounding area, so you’ll get local numbers, not a national average.
Pricing reflects the Glendale market as of 2026. Weathervane Roof Repair offers free estimates – call (877) 755-4274.
What Our Customers Say
"Full replacement after the hail. They handled the insurance adjuster meeting, documented everything, and I did not have to argue with anybody. Crew was here three days and the yard was cleaner when they left than when they started."
— Marco Mendoza"He told me my roof had another five or six years in it and I should not replace it yet. He was standing there with a quote pad in his hand. That's why I'll call him when it's time."
— Karen Kim"Roof is solid and the price was competitive. The job ran a day over because of weather, which is nobody's fault, but I would have liked a call about it rather than noticing the crew hadn't shown up."
— Robert Fletcher